EFP to Fiber for Ikegami OCP includes a Camera Optic Adaptor and a Optic Base Station. The
system transports 1 ch 3G/HD-SDI signal from the Ikegami camera to
the Base Station, 1 ch Reverse 3G/HD-SDI, Genlock or TC/BB, Remote
control(Connect Ikegami Operation Control
Panel:OCP-100,/OCP200/OCP-300/OCP-399), intercom (Camera end can be
connected professional 4-pin or 5-pin XLR headset, OB end can be
connected intercom main station), tally(One color or two colors can
be selected), Remote camera power supply (15V DC up to 150 Watts).
The system puts all of the signals needed for multi-camera
3G/HD-SDI production on a SM tactical or SMPTE hybrid cable,
insuring robust, trouble-free connectivity on any studio or remote
production. Features - 1 ch forward and 1 ch reverse SDI
- Handle all Pathological patterns
- Automatic cable equalization to ensure signal integrity
- 3G/HD/SD-SDI input auto recognition, support 270Mbit/s - 2.97Gbit/s
according to SMPTE 424M, SMPTE 292M and SMPTE 259M
- 10+Km on single mode fiber transmission
- Mic inputs with mute and pre-amps
- Headphone with Intercom volume up or down
- Remote control (Connect Ikegami OCP-100,/OCP200/OCP-300/OCP-3997)
- Tally LED+/- output or dry Contact Closure optional
- V-mount or A-mount battery plate optional, Upper battery plate can
be changed to heat sink
- Genlock or TC/BB are also available
- Remote camera power supply (15V DC up to 150 Watts), with insertion
detection protection
Specifications: General index Work Temp | -25°C to 55°C | Storage Temp | -40°C to 85°C | humidity | 0 ~ 95% (non-condensing) | Camera Optic Adaptor | Input power | DC 11~19V | Power consumption | <12W | Net weight | 1kg | Appearance size | 188mm*116mm*45mm (without V-mount / A-mount) | Optic Base Station | Input power | AC90~240V | Power consumption | <12W | Net weight | 3kg | Appearance size | 19” 1U standard rack mount |
Optical: Wavelength | 1310nm / 1550nm / CWDM | Output Power | -6~-1dBm | Rx sensitivity | <-18dBm | Transmission Distance | Remote power 150W,SMPTE hybrid cable 200+m | Optical connector | Lemo SMPTE 304 / Neutrik OpticalCON DUO hybrid connector Camera end can be rotated 90 degrees |
SDI input/output: Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M | Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s | Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s | SDI interface | BNC 75 Ohm |
Genlock / TC / BB Number of Channels | 1 | Input/output impedance | BNC 75Ω (unbalance) | Input/output voltage | 1.0Vp-p | Differential Gain | < ±1.5% | Differential Phase | < ±1% | SNR | >60dB |
Intercom: Camera Optic Adaptor | Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack | Microphone | Mic inputs with mute and pre-amps | Headphone | with volume up or down | Optic Base Station | Interface | 3pin XLR Female/Male: Party line audio for Clearcom or RTS Intercom
main station ,or Line level balanced audio input and output DB9(Male): Line level unbalanced audio input and output, |
Tally: Camera Optic Adaptor | Interface | 4pin or 3pin mini XLR | Output | Dry Contact Closure or wet LED+/- | On: short or LED on Off: open or LED off | Optic Base Station | Interface | DB9(Male) | Input | Dry Contact Closure or TTL | On: short to GND or TTL low Off: open or TTL high |
Remote: Camera Optic Adaptor | Interface | Ikegami 8 pin connector | Data | Ikegami Remote Control data | Optic Base Station | Interface | Ikegami 8 pin connector | Data | Ikegami Remote Control data |
|
