FEATURES
· 1 channel video and audio transmission of digital video signal
over optic fiber
· Handles pathological pattern
· Automatic cable equalization to ensure signal integrity
· Automatic reclocking 270Mbit/s - 1.48Gbit/s - 3Gbit/s
· Support signal type: 270Mbit/s to 3Gbit/s according to SMPTE
424M, SMPTE 292M and SMPTE 259M standards
·Directly compatible with HD-SDI camera systems and support RS-485
data protocols
· Long transmission capability at least 20 km(6.2 miles)
· Terminal block power input for industrial application
·Supports hot swapping and hot plugging
·Simplex LC/PC single mode optical connection
·Stand-alone type or card-type installed in 19’’ 2U or 4U
rack-mount chassis.
DESCRIPTION
The SDI series fiber video converter is an ideal and economic
solution for broadcasting or surveillance applications. It receives
one HD-SDI electrical input, perfectly converts electrical SDI
signal to single mode optic SDI signal. It supports transmission
image of SDTV (143-540Mbps), HDTV (1.485Gbps) and HDTV (3Gbps,
1080p60).
Both transmitter and receiver provide equalizing and reclocking at
input unit in order to re-construct the signal for consistent
quality. Besides, with advanced fiber technology, SDI can easily
pass pathological pattern to prove its complete transmission.
The SDI series fiber video converter are typically used in applications where the cameras have P/T/Z
capabilities. Plug and Play design ensures the ease of installation
and operation. Electronic and optical adjustments are never
required. LED indicators are provided for instantly monitoring
system status. Devices are available for either standalone or
rack-mount installation ,which is suitable for different working
environment .
SPECIFICATION
Optical:
Wavelength | 149nm/1310nm |
Output Power | -3~+2dBm |
Optic fiber | 9/125u single mode |
Rx sensitivity | -18dBm |
Optical connector | LC |
Distance | 0~40KM |
Data:
Data protocol | Reverse RS485 |
Data rate | 0~200 Kbps |
Error rate | < 10-9 |
Connector | Standard terminal lead |
Video:
SDI Input |
Signal Type SDI | SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data Rates | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
Connector | BNC 75 Ohm |
General: |
Input Power | 5 V DC |
Power consumption (maximum) | 3W |
Operating temperature | 0°C to 55°C |
Storage temperature | -10°C to 70°C |
Operating humidity | 0 ~ 95% (non-condensing) |
Net Weight | 310g per pair |
Case material | Aluminum |
