Simple EFP camera fiber system
Simple EFP To Fiber includes a Camera Optic Adaptor and a Optic Base Station. The
system transports 1 ch 3G/HD-SDI signal from the camera to the Base
Station, intercom (Camera end can be connected professional 4-pin
or 5-pin XLR headset, OB end can be connected intercom main
station), tally(One color or two colors can be selected). The
system puts all of the signals needed for multi-camera 3G/HD-SDI
production on a fiber cable, insuring robust, trouble-free
connectivity on any studio or remote production. The bottom of the
screw hole can be fitted with a camera shoe mount.
Because of its simple function, 4 bases can be combined into one
Optic Base Station.
Features
· 1 ch forward SDI
· Handle all Pathological patterns
· Automatic cable equalization to ensure signal integrity
· 3G/HD/SD-SDI input auto recognition, support 270Mbit/s -
2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M
· 10+Km on single mode fiber transmission
· Mic inputs with mute and pre-amps
· Headphone with volume up or down
· Tally LED+/- output or dry Contact Closure optional
· Genlock or TC/BB are optional
· Remote control data is also optional
· Bottom screw hole can be installed with a camera shoe mount
Specifications:
General index
| Work Temp | -25°C to 55°C |
| Storage Temp | -40°C to 85°C |
| humidity | 0 ~ 95% (non-condensing) |
| Camera Optic Adaptor |
| Input power | DC 11~19V |
| Power consumption | <10W |
| Net weight | <0.5kg |
| Appearance size | 140mm*82mm*28mm |
| Optic Base Station |
| Input power | AC90~240V |
| Power consumption | <20W |
| Net weight | 3kg |
| Appearance size | 19” 1U standard rack mount |
Optical:
| Wavelength | 1310nm / 1550nm / CWDM |
| Output Power | -6~-1dBm |
| Rx sensitivity | <-18dBm |
| Transmission Distance | SM fiber10km, MM fiber 550m |
| Optical connector | ST / FC / SC / LC |
SDI input/output:
| Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
| Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
| Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
| SDI interface | BNC 75 Ohm |
Genlock / TC / BB(can be optional)
| Number of Channels | 1 |
| Input/output impedance | BNC 75Ω (unbalance) |
| Input/output voltage | 1.0Vp-p |
| Differential Gain | < ±1.5% |
| Differential Phase | < ±1% |
| SNR | >60dB |
Intercom:
| Camera Optic Adaptor |
| Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
| Microphone | Mic inputs with mute and pre-amps |
| Headphone | with volume up or down |
| Optic Base Station |
| Interface | DB9(Female) or 3.5mm jack: Line level unbalanced audio input and
output, |
Tally:
| Camera Optic Adaptor |
| Interface | 3.5mm jack or 3pin mini XLR |
| Output | Dry Contact Closure or wet LED+/- |
On: short or LED on Off: open or LED off |
| Optic Base Station |
| Interface | DB9(Male) |
| Input | Dry Contact Closure or TTL |
| On: short to GND or TTL low Off: open or TTL high |
